Motorhome Alarm System

Meet WiTi, your friendly guardian for your Motorhome, Bus or Truck. This groundbreaking system includes an industry-first anti-theft device to give you peace of mind wherever you are.

If anyone tries to play naughty with your precious RV, WiTi will quickly sense the movement using its ultra-sensitive gyroscope. WiTi flashes all the external lights and rings out a powerful 105db alarm to alert those nearby and startle the intruder. After 30 seconds of sounding the siren, WiTi smartly slips back into surveillance mode and gets ready to repeat the cycle if there's more movement.

But hold on, there's more! WiTi Anti-Theft now comes with Intrusion Detection. It uses a Magnetic Door Switch and PIR Sensor to watch for any suspicious activities like an opened door or unexpected movement inside the caravan or trailer. If any such activity is detected, WiTi promptly triggers the alarm.

And the best part? WiTi knows how to distinguish between a thief and a windy day. It's been smartly programmed to ignore any side-to-side rocking movement that might be caused by the wind, preventing any false alarms.

WiTi is not just a deterrent, it's your reliable companion that completely locks down your RV against theft. So kick back and relax, knowing WiTi has got your back!

Installation Instructions

• The unit must be installed vertically, facing either the front or rear of the caravan or trailer.
• The unit should be installed inside the RV, preferably towards the front.
• The horn is weatherproof and can be installed externally.
• Connect the Alarm Status LED outputs to the supplied 12V LED following the wiring instructions.
• The LED will light when the alarm is armed and switch off when disarmed. It will flash if a short circuit or overload is detected.
• Connect the RV to an acceptable charging circuit like solar panels, an Anderson plug, or a DCDC charger.

PIR Motion Sensor

• Install the PIR inside the RV facing North/South for movement detection along the length of the van.
• The PIR has an 11m range to cover the entire RV length.
• If movement is detected, the sensor will signal the WiTi Anti-Theft System to activate the alarm.

Magnetic Door Switch

• Install the door switch on either side of the door frame, ensuring that opening the door separates the two components, activating the sensor.
• When the switch is activated, a blue LED will light up, signalling the WiTi Anti-Theft System to activate the alarm.

Includes:

• WiTi Motorhome Alarm System
• 2 X Remote Controls
• 1 X Wireless PIR Motion Sensor
• 1 X Wireless Magnetic Door Switch
• 1 X External status LED
• 1 X Horn
• 1 X Wiring Loom